Description
Fully waterproof charger keeps you powered up wherever you go outdoors
Because this charger is waterproof, it’s perfect to use outdoors. It doesn’t matter if it’s raining outside. It doesn’t even matter if it falls out of your pocket into a puddle. It doesn’t matter because the charger is fully submersible. This charger is built to withstand moisture and outdoor elements.
Motobatt's microprocessor reads the correct voltage of the connected battery. The 9-phase process monitors the battery resistance hundreds of times per second during charging mode.
Phases of the charger
Qualification Stage checks whether the battery is over 2V for safety reasons. Then transitions to "Rescue" Phase in which an arsenal of 5 different recovery modes revive heavily sulphated or deeply discharged batteries. Generally, at this stage unusually high voltage is seen early in the charge cycle.
Soft Start Phase When the charger detects a low initial state of charge, voltage and current are delivered at a specific rate to assist the battery recovery before entering Pulse charging mode.
Pulse Phase provides a high frequency pulse charge to help the newly recovering battery to accept charge as it enters recondition mode.
Recondition Phase continues to work the battery at a slightly higher voltage and amperage to re-activate the battery plates for improved depth of charge.
Bulk Charge Phase can begin giving constant current to the battery up to about 80% of its capacity.
Absorption Phase begins with constant voltage being supplied while current is reduced. This occurs according to the batteries ability to accept charge up to 100%.
Check Phase monitors the battery’s ability to hold the charge properly. If not, it will cycle back through the entire process for 24 hours or more until it determines the battery cannot be recovered.
Maintenance Phase in which the battery stays indefinitely connected to the charger. As the battery drops voltage while unused, the unit will activate when needed to ensure a full state of readiness.
Features:
- Suitable for all AGM, gel, lead acid and calcium batteries
- 6V and 12V 1.0A 9 Step Algorithm Auto Detecting
- Suggested for 3 to 45AH batteries
- Spark Proof
- Reverse Polarity Protection
- Overcharge Protection
- Temperature Protection
- Battery Recover Mode
- Premium Retail Packaging
- Includes: 21" Clip and Eyelet Maintenance leads
- Wall Mountable
Part Number: CPDCWBT
MPN: AQP-PDCWB
Part Notes
121v WaterBoy Charger-MaintainerNotes : Premium Featured Battery Maintenance Charger, Output: 6V/12V 1A
Part Fitment
Make | Vehicle Type | Model |
Universal Products |