Description
Keep your batteries properly maintained and you’ll enjoy an extended service life
Use the latest technology optimized for Motobatt Batteries. The “plug and play” design of this charger makes it easy for you. A "Smart" microprocessor activates when the battery is connected. This charger is suitable for AGM, GEL and standard flooded type batteries.
Operational Phases of the Charger
Qualification Stage checks whether the battery is over 2V for safety reasons. Then transitions to "Rescue" Phase in which an arsenal of 5 different recovery modes revive heavily sulphated or deeply discharged batteries. Generally, at this stage unusually high voltage is seen early in the charge cycle.
Soft Start Phase When the charger detects a low initial state of charge, voltage and current are delivered at a specific rate to assist the battery recovery before entering Pulse charging mode.
Pulse Phase provides a high frequency pulse charge to help the newly recovering battery to accept charge as it enters recondition mode.
Recondition Phase continues to work the battery at a slightly higher voltage and amperage to re-activate the battery plates for improved depth of charge.
Bulk Charge Phase can begin giving constant current to the battery up to about 80% of its capacity.
Absorption Phase begins with constant voltage being supplied while current is reduced. This occurs according to the batteries ability to accept charge up to 100%.
Check Phase monitors the battery’s ability to hold the charge properly. If not, it will cycle back through the entire process for 24 hours or more until it determines the battery cannot be recovered.
Maintenance Phase in which the battery stays indefinitely connected to the charger. As the battery drops voltage while unused, the unit will activate when needed to ensure a full state of readiness.
Features:
- 12V 2.0A 9 Step Algorithm Auto Detecting
- Auto Switching 120-240VAC-50/60Hz
- Input Cable 6Ft 18AWG, US SPT-2, EU-H03VV
- Max Voltage 14.9V (Pb) 14.6V (LiFePO4)
- Suitable for Lithium and Lead Acid Types
- Dedicated Lithium 9 Step Algorithm
- Suggested for 3 to 100AH batteries (Pb)
- Suggested for 2-20AH (LiFePO4)
- Spark Proof (Lead Acid Only)
- Short Circuit Protection (Lead Acid Only)
- Reverse Polarity Protection (Lead Acid Only)
- Temperature Protection
- Overcharge Protection
- Battery Recover Mode (Not Lithium)
- Premium Retail Packaging
- Includes: 21"Clip and Eyelet Maintenance leads
- Wall Mountable
Part Number: CPDCFBT
MPN: AQP-PDCFB
Part Notes
12v Fat Boy Charger/MaintainerNotes : LITHIUM Battery Charging Capability, Output: 12VDC 2.0A
Part Fitment
| Make | Vehicle Type | Model |
| Universal Products |
